Use local bugfixed Rtc_Pcf8563 library

lib/Rtc_Pcf8563/examples/lcd_clock/lcd_clock.pde

@@ -0,0 +1,63 @@
+/* Demonstration of Rtc_Pcf8563 Clock on LCD. 
+ *
+ * I used a RBBB with Arduino IDE, the pins are mapped a 
+ * bit differently.  Change for your hw.
+ * SCK - A5, SDA - A4, INT - D3/INT1
+ *
+ * This sketch connects a lcd to display the clock output.
+ * 
+ * setup:  see Pcf8563 data sheet.
+ *         1x 10Kohm pullup on Pin3 INT
+ *         No pullups on Pin5 or Pin6 (I2C internals used)
+ *         1x 0.1pf on power
+ *         1x 32khz chrystal
+ *         1x h44780 LCD
+ *
+ * Joe Robertson, jmr
+ * orbitalair@bellsouth.net
+ */
+
+#include <Wire.h>
+#include <Rtc_Pcf8563.h>
+/* add the lcd support */ 
+#include <LiquidCrystal.h>
+
+//init the real time clock
+Rtc_Pcf8563 rtc;
+
+/* initialize the library objects */
+/* LiquidCrystal lcd(rs, en, d4, d5, d6, d7); */
+LiquidCrystal lcd(4 ,9 ,5 ,6 ,7 ,8);
+
+void setup()
+{
+  // set up the LCD's number of rows and columns: 
+  lcd.begin(16, 2);
+  
+  //clear out all the registers
+  rtc.initClock();
+  //set a time to start with.
+  //day, weekday, month, century, year
+  rtc.setDate(14, 6, 3, 0, 10);
+  //hr, min, sec
+  rtc.setTime(1, 15, 40);
+}
+
+void loop()
+{
+  // set the cursor to column 0, line 1
+  // (note: line 1 is the second row, since counting begins with 0):
+  lcd.setCursor(0, 0);
+  //lcd.print(rtc.formatTime(RTCC_TIME_HM));
+  lcd.print(rtc.formatTime());
+  lcd.setCursor(0, 1);
+  //lcd.print(rtc.formatDate(RTCC_DATE_ASIA));
+  lcd.print(rtc.formatDate());
+  
+  delay(1000);
+    
+}
+
+
+
+